Highest quality standards are achieved through the implementations of latest technology, decades of experience and everlasting moral values , which have helped us to retain our customers as well as multiply them.
Mechanical seals are mainly used for high speed sealing between liquids and two gases the two surface aids the lubrication of the two surface, conduct heat caused by friction and improve the sealing effect. The diameter of the counter face should be the same or larger than that of the carbon ring. the finish of the carbon wearing surface and of the counter face is critical to the relative wear rate. Counter face : Grey cast iron, plain, steel alloyed steel hard metal, ceramic, glass, tungsten carbide, silicon carbide.
Is impervious to practically all known acids, solvents & corrosives. permits the handling of inflammable and toxic with absolute safely due to complete elimination of leakage. prevents loss of expensive liquids and gases. SivaSeal is available in various range of styles and sizes, can meet space and installation requirements for practically all types of rotary shaft equipment like centrifugal and rotary pumps, mixtures, agitators and autoclaves. special types of seals can be recommended for handling medium/high pressures and temperatures. Spares-Carbon : Metallic and flexible member-can be had ex stock at all times.
Carbon sleeve bearing are employed where oil lubricated bearing cannot be used. Carbon, with its good dry running ability together with excellent corrosion resistance, form retention and resistance to high temp. and sudden temp changes as well as good thermal conductivity, possess an outstanding combination properties for these application.carbon bearing can be pressed into a process of h7/s6 for operating temperature of up to 1500c. the housing or steel ring should be heated up to about 4500c. the housing or steel ring should be heated up to about 4500c for shrinking in.
Packing rings are divided into two types :
Those with shaft clearance (with gaps) and those in contact with the shaft. The contact pressure of the carbon ring to the cylinder is necessary to achieve. A good sealing effect is attained with the use of garter spring, Calculation of spiral tension spring can be based on maximum permissible contact pressure of the carbon ring on the cylinder of 1………1.5n/cm2
Steam Heated Driers And Calenders in Processing Plant of the
Paper Industry
Textile Industry
Rubber Industry
Chemical Industry
are provided with carbon packing ring pressed laterally onto the steam inlet and outlet vents having concave or convex surface, because this design allows the packing ring to adjust to the oscillation of calender drums. Carbon seal attain the surface quality necessary for sealing after a short running in period.
Carbon Graphite Materials
Carbon Graphite Materials are proven applications for the sealing of shafts and their bearing. These rubbing components are widely used in high temperature applications where the presence of liquid lubricants is unacceptable.
What makes SIV SEAL suitable for the most demanding application? A combination of high temperature withstand, chemical inertness, dry running capacity. low density dimensional stability, impermeability to gas and liquid as well as low thermal co-efficient of expansion.
[precision_moulded_carbon_parts]
Grade :
Manufactured Carbon differs in character from most other materials because of the nature of its composite granular structure, in consequences, the figure quoted beloware typical values and allowance must be made a for the variability obtainable between individual measurements.
|
|
|
FLOTECH Rotary Joints, Rotary Unions and accessories are designed and manufactured, employing the latest manufacturing technology to offer a world class performance. We have established ourselves as one of the market leaders in the field of Rotary Joints within a short span. At FLOTECH, we are ready to meet any requirements in the field of Rotary and Movable connections for thermic fluid (hot oil), steam, water and various other fluids.
FLOTECH Rotary Joints connects a flow of liquid or vapour from a stationary supply pipe to a rotating machine part, such as a roll, dryer or cylinder. They maintain a seal without any usage of packing, adjust to operating pressure and requires no lubrication.
APPLICATIONS
Rubber & Plastics : Film Machine, Injection, Mixing Roll, Extruder, calendar.
Printing & Packaging : Offset Press, Photogravure press, Corrugation Machine
Paper & Pulp : Super Calendar, Coater.
Fiber & Dyeing : Sizings, Vacuum Dryer.
Steel Mill : Continuous Plating, Strip Mill.
Chemical : Drum Dryer, Ball Mill, Conical Dryer.
Food : Cooker, Kettle.
The FS-Series Rotary Joints have a long and trouble free service with ease of maintenance. All the contact parts are corrosion resistant and therefore there are no deposits or rusted particles to damage the carbon graphite component that can cause premature wearing of the seal area. The single piece rotor shaft assures excellent concentrically.
All sizes are available in Mono flow as well as Dual flow (With stationary or rotating internal pipe).
______________________________________________________________
OPERATING DATA
Max. Saturated Steam Pressure : 10.55 Kg/cm2 (150 psi),
Max. Saturated Steam Temperature : 1850 C.
Max. Hot Oil Pressure : 7 KG/cm2 ( 100 psi).
Max. Hot Oil Temperature : 3000 C.
Max. Rotational Speed : 400 RPM.
Operation at maximum pressure continued with maximum speed should be avoided.
FLOTECH FX-SERIES ROTARY UNIONS General Purpose:
These compact and versatile Rotary Unions can be used for water, intermittent steam or hot oil. The stainless steel housing consist of a mechanical seal having seal face combination of Tungston.
Carbide vis Carbon Graphite and a rotor shaft guided by two precision ball bearing that keeps the seal faces in perfect alignment. The seal faces are micro-lapped to an optical flatness of less than 2 light bands to ensure leak proof operation.
All sizes are available in Mono flow as well as Dual flow (With stationary or rotating internal pipe).
These compact and versatile Rotary Unions can be used for water, intermittent steam or hot oil. The stainless steel housing consist of a mechanical seal having seal face combination of Tungston.
Carbide vis Carbon Graphite and a rotor shaft guided by two precision ball bearing that keeps the seal faces in perfect alignment. The seal faces are micro-lapped to an optical flatness of less than 2 light bands to ensure leak proof operation.
All sizes are available in Mono flow as well as Dual flow (With stationary or rotating internal pipe).
FLOTECH SIPHON ELBOW :
There are two types of siphon systems namely Stationary Siphon and Rotating Siphon.
A Stationary siphon elbow is designed primarily for dryers without manholes and a maximum operating speed of 160 fpm. The elbow is designed with a uniform internal diameter, so that there is no flow restriction. They are available in Gun Metal construction and in various sizes from I/4 ” upto I “.
There are various types of Rotating Siphons depending on the speed of the dryer. Please write to us for selection of the same.
The flexible hoses are available in various sizes and materials of construction like stainless steel, rubber and teflon to suit various applications.
O-ring is the most commonly used seal within all industries. We offer a wide range of O-Rings that balance cost-effectiveness with performance. Any size of O-Ring is available (metric or inch, standard or custom), including giant O-Rings. If the O-rings you want are not available off-the-shelf, we can supply them within days from our extensive manufacturing facility. With our flexible production schedules, we can meet the most urgent requests from industry.
In addition, wide choices of materials for both standard and special applications allow the O-Ring to be used to seal practically all liquid and gaseous media. These include best-in-class elastomer like Nitrile (NBR), Fluorocarbon (Viton®), Silicon (VMQ), Fluor silicone (FVMQ), Polyurethane, PTFE (Teflon®), Ethylene Propylene (EPDM), Hydrogenated Nitrile Rubber (H-NBR), Carboxylated Nitrile Rubber(X-NBR), Styrene Butadiene Rubber (SBR), Perfluoroelastomer (FFKM), Neoprene (CR).
Back-up rings are the most common anti-extrusion devices in dynamic sealing. They provide simple solutions to safely increase system pressure or solve an existing seal extrusion problem. Back-up rings function by positioning a more robust material adjacent to the extrusion gap, taking the seal’s place and providing a barrier against high pressures. Back-ups can be used to offset the reduced pressure rating effects of wear rings or to improve seal life at increased pressures. They can also be used to protect seals against pressure spikes, or to ensure seal performance at higher temperatures.
Ptfe Backup Ring supplied by Seals is available in the following material specification such as virgin PTFE, which is used mainly for o-rings, backup rings and for machined parts used in special applications requiring chemical inertness and limited strength. Even they are ideal for use in cryogenic applications.
Bronze filled Ptfe is used in dynamic sealing applications, where the bronze filler gives improved wear resistance, hardness and compressive strength. The electrical properties and chemical resistance are reduced. Graphite filled Ptfe has significant increased thermal conductivity, reduced level of creep. They are self-lubricating, therefore suitable for high-speed applications, without the need for exterior lubrication and applications, which need to remove thermal energy and/or static electricity.
Glass filled Ptfe is used, where there is a need for improved wear and increased coefficient of friction. They are ideal for high dynamic applications E.g. High rotation pumps. These high-performance Ptfe seals are said to provide exceptional life, high chemical resistance, and lower friction that versus conventional elastomer seals. Ptfe seal handles wide variations in pressure and temperature and surface speeds.
Our company offers a diversified range of Cord to the customers at competitive prices. Cords of our company are appreciated in the market owing to high operational efficiency, thermal resistance and cost effectiveness. We offer our entire range in pool or bulk packed material as per the convenience of the clients.
Standard materials :
• Fluorocarbon (80 IRHD).
• Nitrile (70 IRHD).
• Ethylene-propylene (80 IRHD).
• Chloroprene/Neoprene (70 IRHD).
• Silicone (65 IRHD)
How supplied Our cord is supplied by the metre to any length & in most of the elastomers and cord sizes quoted are available from stock or on short lead times. Other sizes and elastomers can be supplied on request.
Quad Ring Seals are four lipped seals with a specially developed sealing profile. A wide range of elastomer materials for both standard and special applications allows practically all liquid and gaseous media to be sealed.
Quad Rings/X-Rings have the following advantages compared to an O ring:
• Avoids twisting in the groove. Due to its special profile, the seal does not tend to roll in the groove during reciprocating movement.
• Very good sealing efficiency. Due to an improved pressure profile over Quad Ring Seal cross-section, a high sealing effect is achieved.
• A lubricant reservoir formed between the sealing lips improves start up.
• Unlike an O-Ring, the mould line flash lies in the trough, between and away from the critical sealing lips.
Features::
Piston seal profile PS001 consists of two piece seal set for sealing pistons with one seal ring and one energizer O-ring.
Composition:
PS001 have two different type of combination, PS001-N & PS001-F for different temperature range
Properties :
Application :
eatures::
Rod seal profile RS001 consists of two piece seal set for sealing rod with one seal seal ring and one energizer O- ring.
Properties :
1.Low friction, free of stick slip
2.High abrasion resistance
3.Wide temperature Range
4.Good thermal conductivity
5.Low wear and high extrusion resistance
6.Wide fluid application range
7.Resistance against cold flow
Application :
1.Mobile Hydraulics.
2.Injection moulding machines.
3.Machine tools.
4.Material Handling Equipments.
Properties :
1.Low friction, free of stick slip
2.High abrasion resistance
3.Wide temperature Range
4.Good thermal conductivity
5.Low wear and high extrusion resistance
6.Wide fluid application range
7.Resistance against cold flow
8.Chamfered profile edges prevent pressing of edge in the corner radii of the housing groove
Application :
1.Mobile hydraulics
2.Injection molding machine
3.Machine tools
4.Material handling equipments
5.Control and regulating apparatus
* To embrace new technologies and methods. * To give unsurpassed products and services to the clients. * To constantly look for improvement and changes.